Sterilizer useful in processes where an excellent steam penetration and automatic drying of the material is required. The pre-vacuum and drying is done with a vacuum pump through a bacteriological filter.

• Table-top cabinet sterilizer.
• Digital controllers based on a scalable PID type microprocessor.
• Safety steering wheel with anti-calorific tips.
• Liquid crystal display for simultaneous indication of temperature, time, pressure, process, programs and lack of energy.
• Process graph on the screen.
• Automatic water loading
• Water tank (reservoir) in interconstructed stainless steel with a capacity of 3.5 liters.
• Self-diagnosis, audible and visible alarm of low water level, high level-full tank, camera level, end of cycle or power failure.
• Five pre-set programs configurable by the user:
• P1- Packages, 121 ° C, 30 min.
• P2- Wrapped instruments, 134 ° C, 15 min.
• P3- Unwrapped instruments, 127 ° C, 15 min.
• P4-Liquids, 121 ° C, 15 min.
• P5-Disinfection, 105 ° C, 30 min.
• Programmable time from 0 to 99 minutes.
• Programmable temperature from 105 ° to 134 ° C.
• Optional output port to USB to record data in memory of sterilization cycles.
• Graph in Excel.
• Automatic depressurization menu with two modes: Continuous draining (for solids) and intermittent draining (for liquids).
• Vacuum pump for the extraction of air from the chamber (pre-vacuum), which ensures the penetration of steam into the materials to be sterilized.
• Post-vacuum (drying of material), carried out by the vacuum pump through a bacteriological filter.
• Internal protection of overheating.
• Overpressure safety valve.
• External cabinet in stainless steel.
• Chamber and door manufactured in stainless steel type 304 or 316 L.
• Platinum sensor type PT-100.
• Perforated tray gives zero stainless steel, clamp-tray polypropylene hose for drainage and bacteriological filter.